Born to Read [Tote Bag]

UV DTF Application Instructions:

1. Clean the glass using mild soap and
   water only. Make sure the cup/tumbler is dry.
2. Carefully align and wrap the UV DTF around the glass. Trim any excess film as needed to ensure a proper fit and prevent overlapping when applying the wrap to the glass cup.
3. Remove the clear backing from the decal.Align the decal on the glass and apply it. Start at one edge/side, press down the wrap, smoothing it across the glass in both directions. The adhesive is very strong and cannot be repositioned/removed once it is applied.
4. Use a squeegee or your fingers to firmly press the decal onto the glass and eliminate any air bubbles.
   Carefully peel off the clear film.

** Please note that we are not responsible for UV DTF that is applied wrongly or damaged during/after application. Ensure you read the application steps properly.

UV DTF CARE:

1. Handwash only and DO NOT scrub the UV DTF surface.
2. NOT dishwasher or microwave safe. 

STICKY RESIDUE:

Cup/tumbler will feel slightly sticky due to its high adhesiveness. This is normal and the stickiness will go off after a few washes/uses.

DTF CARE (TOTE BAG):

1. Turn the garment inside out.
2. Machine wash cold. No bleach.
3. Do not dry clean or iron.
4. Tumble dry low.

Please read shipping, return & refund policy.